Views: 55 Author: Site Editor Publish Time: 2022-03-28 Origin: Site
Stone polishing machine is a kind of stone refurbishment machine, mainly used for stone refurbishment crystal surface, stone refurbishment and maintenance. The stone polishing machine is mainly suitable for granite, marble, artificial stone, terrazzo, etc. This article will introduce the related knowledge of stone polishing machine, I hope it will be helpful to everyone.
Precautions for the use of stone polishing machine.
The company has stone polishing machine products.
Stone polishing machine is a kind of stone refurbishment machine, mainly used for stone refurbishment crystal surface, stone refurbishment and maintenance.
1. When installing abrasives, incline the stone polishing machine, support the rubber pad in contact with the ground, adjust the machine's operation switch to the off position, and press the emergency stop button to be in a locked state.
2. Different abrasives should be replaced with different connection methods in advance, the installation of the disk must remove the dirt on the strong magnet, and the installation of the sticky disk must ensure the stickiness of the sticky disk;
3. In the case of polishing, the stone polishing machine does not need to install the front moving casters;
4. Install the waterproof cover. The connection of the waterproof cover should be at the rear end of the machine, put the machine back in working condition, and adjust the construction folding handle to a convenient operation state;
5. Ensure that the leakage protection device is normal, connect the waterproof power plug of the machine to the socket of the machine, check that all the control buttons of the stone polishing machine are in the off state, and turn on the power;
6. When using a water mill, turn on the water switch to ensure that the water flows into the construction ground, select the operating frequency to pop up the emergency stop button, and select the operating direction for operation;
7. Stop the operation of the stone polishing machine, press the emergency stop button, turn off the operation direction switch, turn off the water switch, and disconnect the main power switch when it is stopped for a long time;
8. Complete the work to clean up the residual water in the stone polishing machine.
Fujian Hualong Machinery Co., Ltd. was established in 1997. Its predecessor was Dounan Machinery Factory founded in 1990. It is an enterprise specializing in the research and development, manufacturing, sales and service of stone quarrying machines, block cutting machines and stone bridge machines. Saws, stone polishing machines and CNC machine tools. We have become one of the leading manufacturers of stone machinery in China. Fujian Hualong Machinery Co., Ltd. owns 81 patents and was rated as a high-tech enterprise by the government. Products sell well in all provinces across the country. Stone polishing machines, stone floor polishing machines, small stone polishing machines, stone edging machines, stone CNC machine tools are also exported to the United States, India, Germany, Britain, Italy, Russia, Uzbekistan, Vietnam, Australia, Egypt, Algeria, South Africa, etc.
Hualong is a high-quality wire mesh stone machinery company specializing in precision stone machinery, stone processing machinery, automated stone machinery, stone cutting machines and stone polishing machines.
If you are satisfied with our company's stone polishing machine, you can directly order or consult related questions about the stone polishing machine. We will provide you with the best stone polishing machine products and services. We are very happy to cooperate with you and bring you satisfactory products.