Maintenance of marble machine

The marble machine performs calligraphy and painting engraving on natural stone, glass and ceramics. This article will introduce the relevant knowledge of marble machine, I hope it will be helpful to everyone.

• Maintenance of marble machine.

• The company has marble machine products.

Maintenance of marble machine.

The marble machine is a precision CNC equipment, and the necessary daily maintenance and maintenance are very important to the service life and accuracy of the marble machine. Please perform maintenance and maintenance of the marble machine according to the following requirements.

Maintenance of marble machine:

1. The continuous running time of the marble machine is less than 10 hours a day to ensure the cleanness of the cooling water and the normal operation of the water pump. The water spindle motor must not be lacking in water, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the temperature of the working environment of the marble machine is too low, the water in the water tank can be replaced with antifreeze.

2. Every time the marble machine is used, pay attention to cleaning up, be sure to clean up the dust on the platform and transmission system, and lubricate the transmission system (X, Y, Z three axes) regularly (weekly). (Note: The X, Y, Z three-axis polished rods are maintained with oil; the screw part is added with high-speed butter; if the temperature of the working environment of the marble machine is too low in winter, the screw and polished rods (square rail or round rail) part should use gasoline first Rinse and clean, and then add oil, otherwise it will cause excessive resistance in the transmission part of the marble machine and cause the machine to displace.)

3. For the maintenance and inspection of the marble machine, the power supply must be cut off, and only after the monitor has no display and the main circuit power indicator light goes out.

The company has marble machine products.

Fujian Hualong Machinery Co., Ltd. was established in 1997. Its predecessor was Dounan Machinery Factory founded in 1990. It is an enterprise specializing in the research and development, manufacturing, sales and service of stone quarrying machines, block cutting machines and stone bridge machines. Saws, stone polishing machines and CNC machine tools. We have become one of the leading manufacturers of stone machinery in China. Fujian Hualong Machinery Co., Ltd. owns 81 patents and was rated as a high-tech enterprise by the government. Stone polishing machines, stone floor polishing machines, small stone polishing machines, stone edging machines, stone CNC machine tools are also exported to the United States, India, Germany, Britain, Italy, Russia, Uzbekistan, Vietnam, Australia, Egypt, Algeria, South Africa, etc.

Hualong is a high-quality wire mesh stone machinery company specializing in precision stone machinery, stone processing machinery, automated stone machinery, stone cutting machines, marble machines and stone polishing machines.

If you are satisfied with our company's marble machine, you can directly order or consult related questions about the marble machine. We will provide you with the best marble machine products and services. We are very happy to cooperate with you and bring you satisfactory products.